Emtron KV8 390 mA @ 14 v 6-22.0 vdc 1 mm Wire In ECU
In stock
13,000 QAR
Product Code: 010002030
WhatsApp enquiry

Emtron's KV8 is a wire-in ECU with extreme flexibility. Industry leading I/O count will ensure you do not have to make any sacrifices when configuring your engine and vehicle. This ECU will support up to 8 Channels of fuel and 8 Channels fully sequential Ignition. Every KV8 is housed in a durable billet Aluminum enclosure and includes up to 32MB permanent memory for on board logging, 4-channel oscilloscope function, Drive By Wire (DBW) control up to 2 channels, dual LSU4.9 Lambda controllers, dual digital Knock control, Ethernet communications and 3 axis G-force sensing to name a few.

• Operating voltage: 6.0 to 22.0 Volts DC (ECU shutdowns at 24.0V)
• Operating current: 390mA at 14.0V (excluding sensor and load currents)
• Reverse battery protection via external fuse
• "Smart" battery transient protection
• Dual 100MHz processors
• 500Mb DDR RAM
• 32MB ECU logging memory, over 1200 channels available, 1Hz to 500Hz logging rate
• 4-Channel oscilloscope function
• Sampling at 100k samples/second
• Includes Crank and Cam sensor inputs
• Includes Digital inputs 1-4
• On-Board barometric pressure sensor, range 40 - 115.0 kPa
• 3-Axis accelerometer, 16-Bit resolution, +2g/+4g/+8g dynamically selectable full-scale
• 1x High speed ethernet 100Mbps for tuning software connection
• 2x CAN 2.0B 1Mbps/6 Channels per node, total 128 messages

Material: 6061 Aluminum CNC Bilet Enclosure
Operating Voltage: 6-22.0 vdc
Operating Current: 390 mA @ 14 v
Maximum Operating Range: -22-230 deg F
Recommended Operating Range: -22-185 deg F
Enclosure Size: 134 mm x 162 mm x 27 mm
Connector System: 120-Way Super Seal Waterproof Connectors with Gold Plated Contacts
Pin Diameter: 1 mm
Current Rating: Maximum 15A Per Pin